Products Low Temperature
« Back to Products

Diacell® ST-DAC System


High-Pressure Microscopy Cryostat

The Diacell® ST-DAC System consists of a Janis ST-500 continuous flow cryostat with an integrated CryoDAC-ST diamond anvil cell.  The system is a turn-key solution for microscopy, imaging, and high spatial resolution photoluminescence at low temperatures and high pressures.

The cryostat combines low thermal-expansion support structure and internal vibration isolation resulting in nanometer scale vibration and drift levels. The geometry offers a short working distance (for use with high magnification optics), and permits mounting on common microscope stages and translators.

Options for the Diacell® ST-DAC System include a temperature controller with cable to cryostat.


TECHNICAL SPECIFICATION

Cryostat Janis Model ST-500
Diamond Anvil Cell Diacell® CryoDAC-ST
Pressure Mechanism Screw-drive
Maximum Pressure 30 GPa
Temperature Range Low Temperatures
Top Angle 52º along vertical axis (DAC)
Bottom Angle 17º along vertical axis (DAC)
Lateral Access N/A
Cooling Via Cryostat
DAC Diameter 25/32 mm approximately
DAC Height 37 mm approximately

Maximum pressure is dependent upon the culet size of the anvils.
Almax easyLab is committed to its policy of continuous improvement.
Specifications may change without notice.
easyLab and Diacell are registered trademarks of Almax easyLab Ltd.

 


PARAMETERS

EXPERIMENTAL
TECHNIQUES
far-IR | Fluorescence | FTIR | Infrared | Microscopy | Raman
MAX
PRESSURE
1 GPa | 10 GPa | 3.0 GPa | 30 GPa
TEMPERATURE
RANGE
Low Temperatures | Room Temperature

Diacell® ST-DAC System

RELATED PRODUCTS
Boehler microDriller
Diacell® CryoDAC-ST
 
RELATED ACCESSORIES
No related accessories
 
RELATED DOCUMENTS
Brochure ST-DAC
2018 - Lima - Glass Transition