Screw-Driven High-Temp. Microscope Cell
Part of the Diacell μScopeDAC series
[Formerly MMC–HT Manual Microscope Cell]
Product Description
This versatile, manually-driven, high-temperature, diamond anvil cell, meets the growing need to reach very high pressures and be compatible with the optical and physical constraints of microscopes. Temperatures up to above 600oC and pressures up to above 50 GPa are achievable.
The Diacell® μScopeDAC-HT(S) is just 25 mm thick along the optical axis and is symmetrical about the sample. Thus, the physical distance from the objective to the sample between the diamond anvils is just 12 mm. This makes the Diacell μScopeDAC-HT(S) compatible with most, if not all, commercial Raman and FTIR systems
Applications
A large and increasing percentage of optical and spectroscopic observations is now made using microscopes. In particular, Raman instruments are commonly sold with integral microscopes to enable efficient scattered light collection, as well as to permit Raman mapping of complex samples. Similarly, FTIR spectrometers are often supplied with reflecting (Cassegrain) microscopes. The Diacell® μScopeDAC-HT(S) is ideal for such applications.
|
Cell Material |
Stainless Steel |
|
Anvil Support Plate |
Tungsten Carbide |
|
Pressure Mechanism |
(S) Screw driven (LH/RH bolts) |
|
Maximum Pressure |
50 GPa |
|
Temperature Range |
High Temperatures (up to 600°C) |
|
Top Angle – X ray |
Optical: Conical 52° |
|
Bottom Angle – X ray |
Optical: Conical 52° |
|
Lateral Access |
N/A |
|
Heating |
Internal ring heater |
|
Cooling |
Water cooled |
|
DAC Diameter |
60 mm |
|
DAC Height |
25 mm |
|
Working Distance to Sample |
12 mm |
|
Numerical Aperture |
0.44 |
|
Interfacing Solution |
N/A |
Maximum pressure is dependent upon the culet size of the anvils.
Almax easyLab is committed to its policy of continuous improvement.
Specifications may change without notice.
easyLab and Diacell are registered trademarks of Almax easyLab Ltd.