Products X-ray
« Back to Products

Diacell® Bragg-LT(S) & Bragg-LT(S) Plus

Screw Driven DAC for X-ray Applications
Part of the Diacell Bragg series

[Formerly DXR-6(B)]

Product Description

The Diacell® Bragg-LT(S) & Bragg-LT(S) Plus are the cryogenic versions of the Bragg-(S) and Bragg-(S)Plus cells, respectively.  Diacell® Bragg-LT(S) uses standard design anvils and beryllium support plates, whereas the Bragg-LT(S)Plus uses conical tungsten carbide support plates and conical anvils.

Naturally, it is also possible to convert a Bragg-LT(S) to a Bragg-LT(S) Plus (and vice-versa) by replacing the hemisphere, lower plate, anvil support plates and anvils.  Please enquiry for more details.

The Diacell® Bragg-LT(S) & Bragg-LT(S) Plus are suitable for use in several commercial cryostats.  Using a screw-drive mechanism and 200 μm anvil culets, pressures up to 95 GPa are achieved.


Particularly suitable for X-Ray diffraction and related work at low temperatures


  Bragg-LT(G) Bragg-LT(G) Plus
Cell Material Beryllium Copper Alloy Beryllium Copper Alloy
Anvil Support Plate Beryllium Tungsten Carbide
Anvil Type Diacell Design Conical
Pressure Mechanism Screw-driven Screw-driven
Maximum Pressure ~100 GPa ~50 GPa
Temperature Range Low Temperatures Low Temperatures
Top Angle X-Ray: conical 90º X-Ray: conical 85º
Bottom Angle X-Ray: conical 90º X-Ray: conical 85º
Lateral Access 12° of 2θ is accessible 12° of 2θ is accessible
Heating N/A N/A
Cooling In a cryostat In a cryostat
DAC Diameter N/A N/A
DAC Height 35 mm approx. 35 mm approx.
Working Distance to Sample 14 mm 14 mm
Numerical Aperture 0.71 0.68
Interfacing Solution TBC TBC

Maximum pressure is dependent upon the culet size of the anvils.
Almax easyLab is committed to its policy of continuous improvement.
Specifications may change without notice.
easyLab and Diacell are registered trademarks of Almax easyLab Ltd.



1 GPa | 10 GPa | 100 GPa | 3.0 GPa | 30 GPa | 50 GPa
Low Temperatures | Room Temperature

Diacell® Bragg-LT(S) & Bragg-LT(S) Plus