Clamp Cell for Low Temperature Applications
Part of the CryoDAC series
The Diacell® CryoDAC-ST was originally designed for micro-Raman work in the continuous flow cryostat, Janis ST-500. However, this cell can also be used for other micro-spectroscopy techniques, such as imaging and high resolution photoluminescence under high pressure. Provisions have also been made to enable electrical work.
The Diacell® cryoDAC-ST has been engineered to fit seamlessly onto the sample mount of the Janis ST-500. For more information about this specific microscopy cryostat, please refer to Janis' webpage.
You can see the cell mounted in the cryostat and microscope here.
|
Cell Material |
High Strength Beryllium Copper |
|
Anvil Support Plate |
Beryllium Copper |
|
Pressure Mechanism |
Screw Drive |
|
Maximum Pressure |
20 GPa |
|
Temperature Range |
To Ultra-Low Temperatures |
|
Top Angle |
52° along vertical axis |
|
Bottom Angle |
17° along vertical axis |
|
Lateral Access |
N/A |
|
Heating |
N/A |
|
Cooling |
In a cryostat |
|
DAC Diameter |
25/32 mm approx. |
|
DAC Height |
37 mm approx. |
|
Working Distance to Sample |
8.5 mm |
|
Numerical Aperture |
0.44 |
|
Interfacing Solution |
Janis' sample mount |
Maximum pressure is dependent upon the culet size of the anvils.
Almax easyLab is committed to its policy of continuous improvement.
Specifications may change without notice.
easyLab and Diacell are registered trademarks of Almax easyLab Ltd.