Lever Arm Driven Optical Cell
Part of the LeverDAC series
[Formerly Diacell B-05]
Product Description
The majority of high pressure research is currently conducted at pressures below 50 GPa. Diacell® LeverDAC-Maxi design has consequently been optimised for use below 50 GPa, and with the addition of an internal ring heater is capable of raising the sample temperature to above 500°C, thereby making accessible an enormous area of P-T space for investigation.
Applications
The Diacell® Lever DAC-Maxi is suitable for many kinds of physical investigations including electronic, infrared, far-infrared, Mössbauer, and Raman spectroscopy, as well as electrical measurements and energy-dispersive X-ray diffraction.
|
Cell Material |
Stainless Steel AISI 440C |
|
Anvil Support Plate |
Tungsten Carbide |
|
Pressure Mechanism |
Lever Arm Drive |
|
Maximum Pressure |
50 GPa |
|
Temperature Range |
High-Temperatures |
|
Top Angle |
Optical: Conical 52° |
|
Bottom Angle |
Optical: Conical 52° |
|
Lateral Access |
N/A |
|
Heating |
Internal Ring Heater to 500 °C to sample - Optional |
|
Cooling |
Cold Air or Evaporated Liquid Nitrogen |
|
DAC Length / Width |
148 mm / 81 mm |
|
DAC Height (at cell) |
45 mm |
|
Working Distance to Sample |
9 mm |
|
Numerical Aperture |
0.44 |
|
Interfacing Solution |
TBC |
Maximum pressure is dependent upon the culet size of the anvils.
Almax easyLab is committed to its policy of continuous improvement.
Specifications may change without notice.
easyLab and Diacell are registered trademarks of Almax easyLab Ltd.