Products Diamonds « Back to Products
Type IIac Standard design
Thick girdle and large table to withstand the hightest pressures.
All dimensions are exact and consistent.
Optimum mechanical strength.
 

Dimensions
Type IIac – Standard design – (100)-oriented
X
in mm		 Approx
weight		 Drawing Product
code
2.50 0.09 P01040 (*)
2.75 0.12 P01041
3.00 0.19 P01042
3.25 0.21 P01043
3.50 0.21 P01044
3.75 0.32 P01045
4.00 0.33 P01046

(*) No stock available at the present moment, please visit our section of Type IIas RULF anvil as an alternative

Note: Standard design anvils are made from rough diamonds. They are polished according to the (100)-crystal orientation for the highest strength.
Type IIac Standard design
 
 
 
 
FT-IR Spectrum
 
Fluorescence

Culet size and modification

Choose culet size as a function of:

maximum pressure

culet size

< 5 GPa

> 1.00 mm

5 – 100 GPa

1.00 mm – 0.20 mm

> 100 GPa

<0.20 mm, bevels up to 0.30 mm at 8°
Note: Typical sample space is given by the gasket thickness (typically 0.10 mm or less) and the central hole diameter (typically 30-50% culet size)
 
 
Note: single and double bevels are recommended for very high pressure and electrical measurements.
Note: single bevels around the culet ease the cleaning of the culet and reduce the risk of damage during alignment.
Examples of typical requests for quote:

Diamond anvil, type IIac, Standard design, 16-sided, 3.00 mm, culet of 0.10 mm, bevels up to 0.30 at 8°, (100)-oriented:
Article nr.:P01042
Quantity: 6 anvils.

Diamond anvil, type IIac, Standard design, 16-sided, 3.50 mm, culet of 0.30 mm, (100)-oriented:
Article nr.:P01044
Quantity: 4 anvils.