Moissanite Standard Design Anvils |
Moissanite (SiC) is an ideal alternative material to diamond.
High strength and lower cost.
Excellent optical properties (e.g. transparent to visible light).
All surfaces are cut smooth and polished.
|
The highest pressures achieved to date in a moissanite anvil cell was 58.7 GPa (c.f. Xu J and Mao H K 2000 Science 290, 783 and Xu J, Mao H K, Hemley R J and Hines E 2002 J. Phys.: Condens. Matter 14).
|
Dimensions
Moissanite – Standard design – polished round |
X in mm |
Appr weight |
|
Product code |
3.5 |
0.26 |
|
P01100 |
3.8 |
0.32 |
P01101 |
4.0 |
0.38 |
P01102 |
4.2 |
0.46 |
P01103 |
4.5 |
0.55 |
P01104 |
4.8 |
0.64 |
P01105 |
|
Raman Spectrum
Transmittance Spectrum
|
|
|
Moissanite Standard Design Anvils
|
|
|
|
|
|
|
Culet size and modification |
|
Choose culet as a function of: |
maximum pressure |
culet size |
< 2 GPa |
> 1.00 mm |
2 – 25 GPa |
1.00 mm – 0.20 mm |
25 – 50 GPa |
<0.20 mm, bevels up to 0.30 mm at 8° |
Note: Typical sample space is given by the gasket thickness (typically 0.10 mm or less) and the central hole diameter (typically 30-50% culet size). Pressures as a function of culet size are approximations only.
|
|
|
|
Note: single bevels are recommended for very high pressure and electrical measurements. |
|
Examples of typical requests for quote: |
Moissanite anvil, Standard design, round, 3.50 mm, culet of 0.50 mm: |
Article nr.: P01100
Quantity: 6 anvils. |
|
Moissanite anvil, Standard design, round, 4.80 mm, culet of 0.20 mm, bevels up to 0.30 at 8°: |
Article nr.: P01105
Quantity: 4 anvils. |
Publications |
ATHE GEM ANVIL CELL: HIGH-PRESSURE BEHAVIOUR OF DIAMOND ANC RELATED MATERIALS
JI-AN XU, HO-KWANG MAO AND RUSSEL J. HEMLEY, J. PHYS.: CONDENS. MATTER 14, 11549 (2002) |
The moissanite anvil cell has been used to study the high-pressure behaviour of diamond. The first-order Raman shift of diamond shows a strong dependence on hydrostaticity, with very different pressure dependences observed
under hydrostatic and non-hydrostatic conditions. The shift of the second-order Raman band under hydrostatic pressures was
determined for the first time. Sapphire has almost no peaks above 1000 cm−1 in the Raman spectrum and no absorption in the
ultraviolet range; it is therefore especially useful for studies in those spectral regions. A sapphire anvil cell was used
in a study of graphite up to 24 GPa. A phase transition was found near 18 GPa, consistent with previous reports, and no
peaks characteristic of diamond in the 1330 cm−1 range were found, indicating that the phase is not diamond.
|
FTIR SPECTRA OF FACETED DIAMONDS AND DIAMOND SIMULANTS
PIMTHING THONGNOPKUN, SANONG EKGASIT, DIAMOND AND RELATED MATERIALS 14, 1592 (2005). |
FTIR spectra of faceted diamonds and diamond simulants collected by diffuse reflectance, transflectance, and specular reflection
techniques were compared. The transflectance technique exploited total internal reflection phenomenon within the faceted diamond for the
spectral acquisition. The transflectance spectra were similar to the well-accepted diffuse reflectance spectra with equal or better spectral
qualities. Based on the observed spectral features of the faceted diamond, classification of the diamond, determination of defects, impurities,
and treatment process (i.e., irradiation and high pressure and high temperature) can be performed.
|
|