Gasket Blank BeCu
BeCu, 5 mm, 0.41 mm
- 5.00 mm gasket blanks;
- 0.41 mm thickness;
- BeCu25-1/2H;
- Bag of 50 off.
Log In or register to see prices.
SKU:
Description
Specifications
Material | Beryllium Copper (BeCu25-1/2H) |
Diameter | 5.00 mm |
Thickness | 0.41 mm |
Almax easyLab is committed to its policy of continuous improvement. Specifications may change without notice. easyLab and Diacell are registered trademarks of Almax easyLab.
FAQs
Should I harden the BeCu gaskets?
BeCu gaskets are supplied in a non-hardened state and can be used like that for low to moderate pressure. If you need to go to high pressure, they can be hardened following the recipe below. Note that the hardening needs to take place after pre-indentation and drilling.
- Hardening to happen in vacuum;
- Increase T to 320 °C at 5 °C / min rate;
- Hold 3 hours (still under vacuum);
- Cool down slowly under vacuum.
You may also like…
Share this product on:
Reviews
There are no reviews yet.