Seat WC, Tapered with Top Taper
Tungsten carbide
- Â Seat used to accommodate Boehler - Almax design anvils
Log In or register to see prices.
SKU:
Description
Tungsten carbide seats that are specific to Boehler – Almax design anvils. The anvils needs to be glued into their tungsten carbide seats (not included).
At the time of ordering, you will be able to specify the key dimensions as the diameter (D), the height (H), the aperture (A), the top taper angle (S) and the taper angle (T).
If the dimensions of the WC seat required for your application are not displayed above, then please contact us with your request.
Specifications
Material | Tungsten carbide (WC) |
Diameter | 8.00 mm, 10.00 mm or 12.00 mm |
Height | 4.00 mm, 5.00 mm or 6.00 mm |
Aperture | 30 – 110 ° |
Top taper angle | 5°, 10°, 15°, 20° |
Taper angle | 5°, 10°, 15°, 20° |
Anvil design | Boehler – Almax design |
Almax easyLab is committed to its policy of continuous improvement. Specifications may change without notice. easyLab and Diacell are registered trademarks of Almax easyLab.
Share this product on:
Reviews
There are no reviews yet.